$109.95

The ELX is a top of the line Frameless goggle. These goggles are perfect for any weather or riding condition you can imagine. Roll through the park and enjoy the Ultra Wide Angle view, Hike for fresh pow and enjoy the great Dual Lens Anti-Fog system, or ride all day and into the night with the Interchangeable Lens System and INCLUDED second lens.

Includes:

  • ELX Frame and Your Choice of Strap
  • Smoke Primary Lens
  • Yellow Backup Lens
  • Microfiber Bag
  • Protective EVA Case
Current Stock:
Warranty:
14 Day Satisfaction Guarantee (Don't like it? Return it for a full refund) + 90 Day Warranty Against Manufacturer Defects

Features

360° Ventilation

Sure most goggles have top and even bottom ventilation to help prevent fogging, but why stop there? The ELX has 6 ventilation slots on top, 5 on each side, 4 on the bottom, and 6 in the lens. That means more air-flow and less-fogging, even while hiking! Do you know what all of those ventilation slots mean? It means these frames are lighter and conform to your face better.

Dual-Layer Anit-Fog Coating

We know there are few things worse than your goggles fogging up on you. Especially when it's at an inoppurtune time like waiting to drop in on a steep chute with weather closing in around you. That's why we apply two coats of anti-fog to our interior lenses. The first is applied directly to the lens during the manufacturing process. The second is applied after the goggles are assembled to ensure the best resistance to fogging possible.

Frameless for Superior Field of Vision

We're certainly not the first to the party with frameless goggles, but we may just be the best at it! All goggles have a frame, whether it's visible on the exterior or not. We use a thin, flexible TPU frame behind the lens to give our goggles a superior fit and incredible field of vision. Blind spots on the hill may just be a thing of the past. Plus we use cutouts on our nose piece to offer a superior range of fit, from the biggest "shnoz" to the most petite.

Eco-Friendly TPU Frame

Because we only have one planet! We developed our goggles to be as eco-friendly as possible. The best way to do this was to replace the traditional TPU material found in many of today's goggles with a renewable source, plant-based TPU. this "bio" TPU material provides all the same advantages of using traditional TPU but contains up to 75% renewable ingredients.

Dual-Layer Polycarbonate Lenses

Our dual-layer lenses are vacuum sealed to prevent air passing between the lenses which, in turn, helps cut down on fogging. The interior lens also fits snuggly within the lip of the TPU frame to create an air-tight seal when the lens is in place. The lens also provides 6 built-in air vents to further reduce fogging. We also treat the interior lens with an anti-fog agent twice, and the exterior lens with a super-hydrophobic solution to help water bead off the lens to reduce icing. Lastly, our lenses use 9 contact points to fasten to the frame so you can be sure they are securely attached.

Made in Italy

Because quality matters! To provide you the best optical experience possible our inner lenses are manufactured in Italy, a country renowned for their production of quality eye wear. This is the cornerstone for our dual-layer sens system and allows us to provide a unique viewing experience.

3-Layer Comfort Foam

We use three layers of anti-microbial foams to line our goggles. The first is a slightly firmer foam which acts as a barrier between the exterior foam and the TPU frame of the goggle to absorb impact. The second layer is a soft comfort foam that hugs your face and creates a tight seal against air leaking in. The third layer is a thin, comfortable layer of moisture wicking foam.

Helmet Compatible

We were tired of our goggles fitting differently depending on whether we were wearing a helmet or not. Some goggles feel great with just a beanie on, but when you wear them over a helmet a gap is created at the edge of the goggles which lets in additional cold air and can lead to ice build-up on the interior of the lens as well as drying out your eyes. Other goggles are helmet compatible, but the side buckles they use obstruct your peripheral vision. Our buckles' skeletons are made of a hard Polycarbonate to provide rigidity while we use TPU on the underside of our buckles to reduce weight and prevent damage to the lens. We designed our buckles to sit flat against the lens, as far back as possible, to prevent obstructing your vision.

Silicone Beaded Straps

Having your goggles slide down your face is a nightmare while flying down the mountain. That's why we incorporated three distinct lines of silicone beading on all of our straps. So, whether you're wearing a helmet or a beanie, you can be confident that your goggles won't move and you won't have to tighten them down to the point of cutting off circulation simply to keep them on.

Assembled in the USA

We assemble and quality check every pair of Ltd. Optics goggles in Salt Lake City, UT. We do this to ensure that each pair of goggles we sell fits your needs while also meeting our rigid standards for quality. This fact, coupled with a superior warranty, mean you can feel confident that you are buying the best goggles on the market.

Video

Reviews Hide Reviews

Falling in Love

I got these goggles simply because I needed to be able to change the lens between bluebird, greybird, and night. The blackout lens is absolutely the best I've had for bluebird conditions, and the yellow backup is great for greybird. I'm looking to get one of the clear red lenses for night time down the road, but the yellow works fine at night for now. The technology used to hold and switch the lenses is fairly easy, and you get used to it quickly. Great goggles all around, I highly recommend them.

Love! Love! Love!

Love these goggles. They are super comfy with a great field of vision and they never fog on me! Recommending these to all of my friends next season.