Loading... Please wait...

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13

Customers Who Viewed This Product Also Viewed



 Product Description

The ELX is a top of the line Frameless goggle. These goggles are perfect for any weather or riding condition you can imagine. Roll through the park and enjoy the Ultra Wide Angle view, Hike for fresh pow and enjoy the great Dual Lens Anti-Fog system, or ride all day and into the night with the Interchangeable Lens System and INCLUDED second lens.


  • ELX Frame and Your Choice of Strap
  • Your Choice of Colored REVO Primary Lens
  • Clear Red REVO Backup Lens
  • Microfiber Bag
  • Protective EVA Case


360-ventilation.png 360° Ventilation
Sure most goggles have top and even bottom ventilation to help prevent fogging, but why stop there? The ELX has 6 ventilation slots on top, 5 on each side, 4 on the bottom, and 6 in the lens. That means more air-flow and less-fogging, even while hiking! Do you know what all of those ventilation slots mean? It means these frames are lighter and conform to your face better.
Frameless for Superior Field of Vision
We're certainly not the first to the party with frameless goggles, but we may just be the best at it! All goggles have a frame, whether it's visible on the exterior or not. We use a thin, flexible TPU frame behind the lens to give our goggles a superior fit and incredible field of vision. Blind spots on the hill may just be a thing of the past. Plus we use cutouts on our nose piece to offer a superior range of fit, from the biggest "shnoz" to the most petite.
Eco-Friendly TPU Frame
Because we only have one planet! We developed our goggles to be as eco-friendly as possible. The best way to do this was to replace the traditional TPU material found in many of today's goggles with a renewable source, plant-based TPU. this "bio" TPU material provides all the same advantages of using traditional TPU but contains up to 75% renewable ingredients.
Dual-Layer Polycarbonate Lenses
our dual-layer lenses are vacuum sealed to prevent air passing between the lenses which, in turn, helps cut down on fogging. The interior lens also fits snuggly within the lip of the TPU frame to create an air-tight seal when the lens is in place. The lens also provides 6 built-in air vents to further reduce fogging. We also treat the interior lens with an anti-fog agent twice, and the exterior lens with a super-hydrophobic solution to help water bead off the lens to reduce icing. Lastly, our lenses use 9 contact points to fasten to the frame so you can be sure they are securely attached.
Made in Italy
Because quality matters! To provide you the best optical experience possible our inner lenses are manufactured in Italy, a country renowned for their production of quality eye wear. This is the cornerstone for our dual-layer sens system and allows us to provide a unique viewing experience.
foam.jpg 3-Layer Comfort Foam
We use three layers of anti-microbial foams to line our goggles. The first is a slightly firmer foam which acts as a barrier between the exterior foam and the TPU frame of the goggle to absorb impact. The second layer is a soft comfort foam that hugs your face and creates a tight seal against air leaking in. The third layer is a thin, comfortable layer of moisture wicking foam.
helmet-comp.png Helmet Compatible
We were tired of our goggles fitting differently depending on whether we were wearing a helmet or not. Some goggles feel great with just a beanie on, but when you wear them over a helmet a gap is created at the edge of the goggles which lets in additional cold air and can lead to ice build-up on the interior of the lens as well as drying out your eyes. Other goggles are helmet compatible, but the side buckles they use obstruct your peripheral vision. Our buckles' skeletons are made of a hard Polycarbonate to provide rigidity while we use TPU on the underside of our buckles to reduce weight and prevent damage to the lens. We designed our buckles to sit flat against the lens, as far back as possible, to prevent obstructing your vision.
silicone.jpg Silicone Beaded Straps
Having your goggles slide down your face is a nightmare while flying down the mountain. That's why we incorporated three distinct lines of silicone beading on all of our straps. So, whether you're wearing a helmet or a beanie, you can be confident that your goggles won't move and you won't have to tighten them down to the point of cutting off circulation simply to keep them on.
usa.jpg Assembled in the USA
We assemble and quality check every pair of Ltd. Optics goggles in Salt Lake City, UT. We do this to ensure that each pair of goggles we sell fits your needs while also meeting our rigid standards for quality. This fact, coupled with a superior warranty, mean you can feel confident that you are buying the best goggles on the market.



 Product Videos

ELX - How to swap out your lens
  • ELX - How to swap out your lens
    Instructional video to showing how to remove and attach lenses...

 Warranty Information

14 Day Satisfaction Guarantee (Don't like it? Return it for a full refund)
90 Day Warranty Against Manufacturer Defects

 Product Reviews

Write review

  1. Solid!

    Posted by Unknown on 12th Jan 2018

    Looks great, goggles fit very comfortable on my face and line up well against my helmet. Both lenses work great for their specific conditions and is simple and easy to swap the lens. Very durable as well, can be tossed around with no worries :)

  2. Top Notch

    Posted by richard on 30th Dec 2015

    Wore these goggles the past couple days and i love them! fit comfy on my face and easy to switch lenses!

  3. awesome!

    Posted by Unknown on 14th Dec 2015

    I love the goggles. Super stylish and comfortable. I can't wait for many days with them

Calculated at checkout




Click the button below to add the ELX - REVO to your wish list.